53tp series ip20 ? three-phase solid-state relay; ratings 25a , 50a per phase @ 48-530 vac ? 2 package styles ip20 or ip00 (see ip00 spec sheet for more information) ? scr output for heavy industrial loads ? ac or dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? led input status indicator ? transient protection built in product selection control voltage 25a 50a 90-140 vac b53tp25c b53tp50c 180-280 vac c53tp25c c53tp50c 4-32 vdc d53tp25c d53tp50c 18-36 vac e53tp25c e53tp50c available options output specifications (1) description 25 a 50 a operating voltage (47-63hz) [vrms] 48-530 48-530 transient overvoltage [vpk] 1200 1200 maximum off-state leakage current @ rated voltage [marms] 3 3 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 maximum load current per phase [arms] (3) 25 50 minimum load current per phase [arms] 0.1 0.1 maximum 1 cycle surge current (50/60hz) [apk] 275-300 710-750 maximum 1 second surge current 50/60 hz [apk] 85 150 maximum on-state voltage drop @ rated current [vpk] 1.35 1.35 thermal resistance juncti on to case (rjc) [c/w] 0.24 0.12 maximum 1/2 cycle i2t for fusing (50/60 hz) [a2 sec] 380-370 2520-2320 minimum power factor (with maximum load) 0.5 0.5 ul/iec 60947 motor control ratings at 120v [hp/kw] (4) 0.75/0.56 1.5/1.11 ul/iec 60947 motor control ratings at 240v [hp/kw] (4) 1/0.74 3/2.22 ul/iec 60947 motor control ratings at 380v [hp/kw] (4) 2/1.48 5/3.7 ul/iec 60947 motor control ratings at 480v [hp/kw] (4) 3/2.22 7.5/5.55
input specifications (1) description d53 b53 c53 e53 control voltage range 4-32 vdc 90-140 vac 180-280 vac (6) 18-36 vac minimum turn-on voltage 4.0 vdc 90 180 18 minimum turn-off voltage 1.0 vdc 10 10 2 minimum input current (for on-state) 24 ma 7.0 ma 7.0 ma 15 ma maximum input current 35 ma 16 ma 20 ma 20 ma nominal input impedance current regulated current regulated current regulated current regulated maximum turn-on time [msec] (5) 8.33 20 20 20 maximum turn-off time [msec] 8.33 30 30 30 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 125 c weight (typical) 12.7 oz (360g) encapsulation na terminals hardware furnished, mounted input terminal screw torque range:[in lbs/nm] 8-10 / 0.9-1.1 output terminal screw torque range:[in lbs/nm] 15-20 / 1.7-2.2 general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) heat sinking required, see page 3 for derating curves. 4) at 40c ambient temperature. 5) turn-on time for random turn-on versions is 0.02 msec (dc control models) 6) for operating temperatures above +60c maximum control voltage is 260 vac. mechanical specifications
thermal derate information agency approvals designed in accordance with the requirements of iec 62314 en60950 : meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: iec 62314 iec 60068-2-6 35mm / 10-55hz iec 60068-2-27 15g / 11ms iec 1000-4-2 : electrostatic discharge ? level 3 iec 1000-4-3 : radiated electromagnetic noise ? level 3 iec 1000-4-4 : electrically fast transients ? level 3 iec 1000-4-5 : electrical surges ? level 3 iec 1000-4-6 : conducted electromagnetic noise ? level 3 e79183 rev 101112
annex - enviromental information
|
